Dallas Fort Worth 5.0 Mustang Club

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   Performance (http://www.dfw50s.com/forumdisplay.php?f=30)
-   -   True Street Dyno Tune (http://www.dfw50s.com/showthread.php?t=3500)

brtnstrns 01-20-2014 02:23 PM

True Street Dyno Tune
 
The guys at True Street were able to squeeze out a little more HP and a pretty large chunk of Torque on my Mach 1. Keep in mind the Mach is N/A:

http://i.imgur.com/XnzoVFR.jpg?1

Still having some stalling issues but hopefully I'll be able to make it back over to McKinney in the next couple weeks to see if it can get sorted out! Then it'll be time for a full Maximum Motorsports front suspension install...

Grandpa 01-20-2014 02:45 PM

Good power for a NA 4.6!

re-rx7 01-20-2014 03:13 PM

Nice tq gain.

03MachMe 01-20-2014 03:32 PM

Real good power for an Na mach. What's done to the motor?

DirtyD 01-20-2014 03:38 PM

Awesome man! Those are solid numbers!

brtnstrns 01-20-2014 09:22 PM

Quote:

Originally Posted by 03MachMe (Post 61777)
Real good power for an Na mach. What's done to the motor?

Well according to the previous owner:

Forged pistons/rods/crank - stroked to 5.0
Stage 3 MMR Heads
Comp 106200 Cams - all associated components upgraded
Ported stock length intake
JLT RAI
MAC Long Tube Headers
Mezierre Electric Water Pump
Upgraded oil pump/gears (forgot exactly what brand)
ATI Super Damper
Catted X-pipe
Steeda Catback
4.10 gears in an IRS

-that's about all I can remember

We're thinking the compression ratio is 9:1 or less. This is what HPP says they remember building it to (in 2008 - trying to remember in 2013 doesn't make it 100% certain) and the guys at TS say that's likely the CR they went with since the previous owner was planning for a twin turbo setup.

Definitely liking the torque gain they were able to get me, just hoping we can get the stalling issue worked out. Sucks when you slam on the brakes in auto-x and the car stalls out mid-turn (as I experienced at the Mustangs v Camaros event).

rlhay2 01-20-2014 09:48 PM

Quote:

Originally Posted by brtnstrns (Post 61814)
We're thinking the compression ratio is 9:1 or less.

Lower compression motors (especially modular motors) respond very well to aggressive timing curves. Any idea what the lower rpm timing numbers are?

brtnstrns 01-21-2014 09:39 AM

Quote:

Originally Posted by rlhay2 (Post 61818)
Lower compression motors (especially modular motors) respond very well to aggressive timing curves. Any idea what the lower rpm timing numbers are?

I honestly have no idea.

yefferys50 03-19-2014 05:25 PM

Stellar power from a, possibly low compression, NA 4.6.

STROKD 03-19-2014 06:29 PM

Why do u guys keep saying good power from a 4.6 when he clearly said its a 5.0? Lmfao

blownaltered 03-19-2014 06:50 PM

Ok its a stroked 4.6, there happy lol.

yefferys50 03-20-2014 04:34 PM

Quote:

Originally Posted by STROKD (Post 67168)
Why do u guys keep saying good power from a 4.6 when he clearly said its a 5.0? Lmfao

I was referring to it being a 4.6 based motor.

brtnstrns 03-20-2014 06:52 PM

Quote:

Originally Posted by yefferys50 (Post 67148)
Stellar power from a, possibly low compression, NA 4.6.

Thanks, we're still working on getting the stalling issue fixed. Have all brand new Motorcraft TPS, IAC, O2 sensors and then EGR delete plate and vacuum lines capped and brand new NGK TR55 plugs gapped to .054" but the car is still stalling at dead stop sometimes. Hopefully one more trip to adjust some of the parameters can finally get this rat bastard sorted out

Quote:

Originally Posted by STROKD (Post 67168)
Why do u guys keep saying good power from a 4.6 when he clearly said its a 5.0? Lmfao

Quote:

Originally Posted by yefferys50 (Post 67308)
I was referring to it being a 4.6 based motor.

Correct. Would be sweet if it made sense to put a coyote in it!

Dan12GT 03-21-2014 09:34 PM

Dang pretty good numbers from a former 4.6. I want to say my buddy's Mach put down something like 36x with full bolt ons and a HPP tune. I have always loved the 03-04 Mach 1s. It actually inspired me to get into Mustangs. Made me buy my first Mustang an 01 GT back 8ish years ago now.


All times are GMT -4. The time now is 07:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.