Adjustable rear spring perch
 

What's the story on this, does it take something like a 2.5"ODx12" coilover spring? If so this could be something useful to me, the selection of so called drag springs is severely lacking.

http://vorshlag.smugmug.com/Product-...1028&k=zQc6752

They are built to take a 60mm spring and we often turn them down to take a 2.25" spring. We used to be able to get shims to keep a 2.5" spring from rattling on it, but they are not available any more and we have not yet tooled up to make our own.

Two ride height adjusters and two adapters to the S197 axle are $275. We usually pair them with an 8" or 9" spring depending on the spring rate and ride height.

...and they're really well put together and easy to adjust