Dallas Fort Worth 5.0 Mustang Club

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   The Lounge (http://www.dfw50s.com/forumdisplay.php?f=12)
-   -   What if 2015 IRS can be retrofit into a S197? (http://www.dfw50s.com/showthread.php?t=3119)

saunupe1911 11-14-2013 11:07 AM

What if 2015 IRS can be retrofit into a S197?
 
It's seems to me that the S550 platform will still be extremely structurally similar to the S197 except for the rear IRS. I wonder if it will be easy to retrofit it into our S197... similar to how Terminators owners swap out IRS vs SRA? Also would you do it if the IRS proves to be a huge performance difference?

DirtyD 11-14-2013 11:26 AM

Completely different chassis. I think the car is narrower than the S197, but I guess we will see...

The difference with the Cobra IRS to SRA was the fact the Cobra still retained the ability to mount the SRA to existing locations on the body and such.

donutninja 11-14-2013 11:43 AM

It would be nice but would it really be worth it? I would imagine that, even if it fit, it would be a major ordeal. Prolly be better off trading in and getting a 2015....though, I think it's kind of ugly.

JDBishopArts 11-14-2013 11:54 AM

Yay for breaking half shafts!

Grandpa 11-14-2013 11:58 AM

I personally don't see a need for it. The aftermarket available to Mustang owners is so vast and full of components that can make the SRA suspension handle very well that I don't see a need to put a very heavy IRS in it that might/might not work as well.

Hell, Corvette is still using a transverse rear leaf spring type set up and it handles better than some super cars that cost 3 times as much with really advanced IRS systems!

saunupe1911 11-14-2013 12:07 PM

Quote:

Originally Posted by SlowGreyGT (Post 56430)
I personally don't see a need for it. The aftermarket available to Mustang owners is so vast and full of components that can make the SRA suspension handle very well that I don't see a need to put a very heavy IRS in it that might/might not work as well.

Hell, Corvette is still using a transverse rear leaf spring type set up and it handles better than some super cars that cost 3 times as much with really advanced IRS systems!

Ford has been quoted by MT and C&D saying that the rear IRS is 200 pounds lighter than today's SRA.

Grandpa 11-14-2013 12:29 PM

Quote:

Originally Posted by saunupe1911 (Post 56431)
Ford has been quoted by MT and C&D saying that the rear IRS is 200 pounds lighter than today's SRA.

Link?

How is that even physically possible? Is it made out of plastic?

I'd believe that when I see it. Two hundred pounds is an incredible amount of weight to remove from a car entirely, let alone from just the rear end itself. Especially one with even more moving parts on it.

saunupe1911 11-14-2013 12:36 PM

Quote:

Originally Posted by SlowGreyGT (Post 56441)
Link?

How is that even physically possible? Is it made out of plastic?

I'd believe that when I see it. Two hundred pounds is an incredible amount of weight to remove from a car entirely, let alone from just the rear end itself. Especially one with even more moving parts on it.

There you go. I assume MT and C&D have the same source since they are sibling companies and regurgitate the same info. It's much more realistic than the crazy, initial 400 pound rumor.

http://www.caranddriver.com/news/201...py-photos-news

My guess is that it's all aluminum control arms. I hope it's strong based upon the power they plan to make for this platform

DirtyD 11-14-2013 12:39 PM

Quote:

Originally Posted by SlowGreyGT (Post 56441)
Link?

How is that even physically possible? Is it made out of plastic?

I'd believe that when I see it. Two hundred pounds is an incredible amount of weight to remove from a car entirely, let alone from just the rear end itself. Especially one with even more moving parts on it.

CF CV shafts and aluminum titanium housings....:lol:

Grandpa 11-14-2013 12:49 PM

Quote:

Originally Posted by saunupe1911 (Post 56444)
There you go. I assume MT and C&D have the same source since they are sibling companies and regurgitate the same info. It's much more realistic than the crazy, initial 400 pound rumor.

http://www.caranddriver.com/news/201...py-photos-news

My guess is that it's all aluminum control arms. I hope it's strong based upon the power they plan to make for this platform

"The new “S550” chassis sits underneath this convertible, and it not only brings an independent rear suspension—finally—but also saves a couple hundred pounds of weight over the old car. Cutting out some fat not only will help efficiency but should also be a boon to both ride and handling."


They aren't saying the rear-end is 200lbs lighter, they are saying the whole car is a couple hundred pounds lighter which makes much more sense.

Hopefully the IRS is a vast improvement over that junky one from 2003. We will just have to wait to see.

I find myself very leary of the 2015 Mustang. Take all of the quirks of the current Coyote issues like the questionable durability of the motor itself and the MT82, then add to that a new IRS and platform that will be unproven. Wow, big gamble on a new performance car.

Grandpa 11-14-2013 12:51 PM

Quote:

Originally Posted by DirtyD (Post 56445)
CF CV shafts and aluminum titanium housings....:lol:

LMAO, I see that going well. Should be cheap to repair too!

re-rx7 11-14-2013 01:04 PM

To mustang purist the new mustang is gna take a nose dive. I myself do not like it and i agree with everuthing steve is saying.

Grandpa 11-14-2013 01:10 PM

Quote:

Originally Posted by re-rx7 (Post 56450)
To mustang purist the new mustang is gna take a nose dive. I myself do not like it and i agree with everuthing steve is saying.

I love the Mustang and always have ,but it seems the direction Ford is going with it makes it more BMW like than like a Mustang. And there is nothing wrong with BMW, hell they are the benchmark for performance in a lot of catagories. It's just in my opinion Ford is getting more away from what I think a Mustang is which is affordable performance for the average guy.


My current Mustang doesn't feel like a Mustang to ME. If feels closer to a Caddy than it does a Mustang. It doesn't feel as tight or performance oriented, but rather more luxury. It's different, just takes some getting used to I suppose.

saunupe1911 11-14-2013 01:30 PM

I just want this car to be fast (in straight line as well as the corners) and affordable. I can't believe how much yall seem to favor the SRA. This is my first and last SRA car. I'm used to the quirks at this point, but it's course has run out with me. Was the Terminator IRS that bad? Yall are bitter lol

Also, what if the price doesn't increase? It will still be the best bang-for-ya-buck performance car.

Grandpa 11-14-2013 01:37 PM

Quote:

Originally Posted by saunupe1911 (Post 56453)
I just want this car to be fast (in straight line as well as the corners) and affordable. I can't believe how much yall seem to favor the SRA. This is my first and last SRA car. I'm used to the quirks at this point, but it's course has run out with me.

I think the point you are missing here is that no one would mind an IRS if it was durable enough to handle the abuse and wasn't so expensive. The Mustang aftermarket is huge and all the issues with the SRA suspension have been ironed out. You can beat the ever loving snot out of a SRA and it will hold up to the abuse. If you ever had been in a Terminator with bad wheel hop from the crap IRS you'd understand why. They are junk!

The IRS in 03-04 was a miserable failure that twisted halfshafts with even stock power let alone the guys with real power. Foofinator kept extra Lvl 5 halfshafts on the shelf because they broke so often. Most Terminator guys who race a lot usually convert to a SRA axle. That should tell you something.


All times are GMT -4. The time now is 09:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.