Go Back   Dallas Fort Worth 5.0 Mustang Club > 5.0 Mustang Forum > General Discussions

General Discussions Discuss anything in general about your 5.0 Mustang that doesn't belong within the other categories here.


Sponsored Ads
Welcome to DFW50s.com

Register to remove these ads.




Reply
 
Thread Tools Display Modes
Old 10-23-2013, 10:52 AM   #1
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default Help Me Understand Timing

With the help of Dad (Brent) a couple of weeks ago, he helped me to put together the general pieces of the tuning puzzle for any car. I was very appreciative of this.

After running some more logs on a revised tune, my car is still pulling up to 3 degrees of timing from the knock sensors, ending up around 21-22° of final timing. The AFRs seem to be staying relatively spot on, however.

I know that air temp, fuel octane, and other factors influence the car pulling timing to protect itself, I just don't know the details on why/how.

I'm looking for help to further expend my understanding of this stuff, and to know whether I am still okay running my car hard in the colder weather now that it's hear, and that nothing will happen.
DirtyD is offline   Reply With Quote
Old 10-23-2013, 02:56 PM   #2
McNastyGT
Member
 
McNastyGT's Avatar
 
Join Date: Oct 2013
Location: Frisco
Age: 35
Posts: 62
Default

Your good as long as you are not getting any knock
McNastyGT is offline   Reply With Quote
Old 10-23-2013, 03:49 PM   #3
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default

Originally Posted by McNastyGT View Post
Your good as long as you are not getting any knock
Well it's hard to tell sound wise when I'm rolling the car up to 7k....
DirtyD is offline   Reply With Quote
Old 10-23-2013, 04:16 PM   #4
wbt
Senior Member
 
Join Date: Aug 2013
Posts: 186
Default

Originally Posted by McNastyGT View Post
Your good as long as you are not getting any knock
That's not very helpful.....

He is getting knock which is why his car is pulling timing.

There are a few things to consider when discussing timing:

1. Quality of fuel being used
2. Commanded timing
3. Detonation
4. Cylinder pressure

Certainly not the whole picture but most of it.

Basically what happens is you command a certain amount of spark advance in the tune which can be RPM based. There is also a global spark advance modifier that works towards overall timing. When you hear of someone taking a few degrees out running nitrous for example, they are doing so on a global scale generally.

The knock sensors work to detect detonation. If they detect it, spark advance will be reduced and then ramp back in when it is back under control. Knock sensors can also allow timing to be added in vs. just for reduction.

Using a fuel such as e85 will allow for a greater amount of timing to be used as it is highly resistant to pre-ignition causing detonation. There are much deeper conversations that can be had about e85 and it's ability to resist detonation.

Then comes the whole discussion on octane rating and fuel. IMO you want to use the lowest octane fuel possible before detonation occurs. This ensures a more complete burn.

Cylinder pressure and dynamic vs. static compression have a lot to do with the detonation, timing, fuel discussion as well.

Not a cookbook by any means but a high level overview of what is happening.
wbt is offline   Reply With Quote
Old 10-23-2013, 04:50 PM   #5
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default

I've filled up with 93 octane from 2 different Shell station in 2 different cities, and both datalog sessions showed up to 2.5-3° of timing being pulled from the knock sensor. This was denoted by a positive value under the knock sensor category. All the AFR were in check with what was being commanded.

I sent the datalogs to me tuner, who is one of the best ones in the Coyote platform (not AED), and his email back to me said that everything looked good and made small tweaks.

Both of these logs have come in colder temperatures than what my car was datalogging in the beginning, 65-75° now versus 80-85° before. Can that possibly be causing the issues?

I just want to know that my car is safe to drive hard, and that I won't screw anything up.

I will gladly forward someone my datalogs to look into if you supply an email.
DirtyD is offline   Reply With Quote
Old 10-23-2013, 05:08 PM   #6
wbt
Senior Member
 
Join Date: Aug 2013
Posts: 186
Default

Originally Posted by DirtyD View Post
I've filled up with 93 octane from 2 different Shell station in 2 different cities, and both datalog sessions showed up to 2.5-3° of timing being pulled from the knock sensor. This was denoted by a positive value under the knock sensor category. All the AFR were in check with what was being commanded.

I sent the datalogs to me tuner, who is one of the best ones in the Coyote platform (not AED), and his email back to me said that everything looked good and made small tweaks.

Both of these logs have come in colder temperatures than what my car was datalogging in the beginning, 65-75° now versus 80-85° before. Can that possibly be causing the issues?

I just want to know that my car is safe to drive hard, and that I won't screw anything up.

I will gladly forward someone my datalogs to look into if you supply an email.
Sending you a PM with my email address. I make no promises or guarantees but will look over it.
wbt is offline   Reply With Quote
Old 10-23-2013, 05:17 PM   #7
JDBishopArts
Senior Member
 
JDBishopArts's Avatar
 
Join Date: Aug 2012
Location: Valley Ranch
Age: 40
Posts: 1,123
Default

I'd try a different brand gas.

I've seen some cases where 93 with additives doesn't act like 93 without. Try it and see what happens. Your car should not be pulling that much timing. Doesn't sound like you're trying to give it too much timing. Try QT gas. Very high quality, the turnover in the gas in the tanks is good.
JDBishopArts is offline   Reply With Quote
Old 10-23-2013, 05:22 PM   #8
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default Help Me Understand Timing

Originally Posted by JDBishopArts View Post
I'd try a different brand gas.

I've seen some cases where 93 with additives doesn't act like 93 without. Try it and see what happens. Your car should not be pulling that much timing. Doesn't sound like you're trying to give it too much timing. Try QT gas. Very high quality, the turnover in the gas in the tanks is good.
I've never had issues with shell before, but I will try another brand next tank and log what I find.

As far as I know, I should be commanding around 25° or so...

I ran QT gas a few times and it didn't go over well...
DirtyD is offline   Reply With Quote
Old 10-23-2013, 06:06 PM   #9
re-rx7
Banned
 
Join Date: Apr 2013
Location: Gainesville,Tx
Age: 38
Posts: 2,405
Default

Chevron exxon/mobil. Wbt pretty much hit the nail on the head.
re-rx7 is offline   Reply With Quote
Old 10-23-2013, 06:26 PM   #10
JDBishopArts
Senior Member
 
JDBishopArts's Avatar
 
Join Date: Aug 2012
Location: Valley Ranch
Age: 40
Posts: 1,123
Default

Stock plugs? Did you gap down?
JDBishopArts is offline   Reply With Quote
Old 10-23-2013, 06:29 PM   #11
JDBishopArts
Senior Member
 
JDBishopArts's Avatar
 
Join Date: Aug 2012
Location: Valley Ranch
Age: 40
Posts: 1,123
Default

And I don't know much about the correct timing for NA 5.0s but isn't 25 a bit high? I thought most were around 20-22 and the race tunes were 23-24. I'd either get another tune or back the timing off till it stops knocking. Some cars act different than others.

Last edited by JDBishopArts; 10-23-2013 at 06:32 PM.
JDBishopArts is offline   Reply With Quote
Old 10-24-2013, 11:06 AM   #12
TrueStreetTim
DFW5.0s Preferred Vendor
 
TrueStreetTim's Avatar
 
Join Date: Aug 2012
Location: McKinney
Posts: 676
Default

I worked with aviation fuel for 9 years. Shell was the bastard son of fuel in that industry as well. It's funny that folks that feel they may have a fuel issue.....buys from Shell.
TrueStreetTim is offline   Reply With Quote
Old 10-24-2013, 11:42 AM   #13
wbt
Senior Member
 
Join Date: Aug 2013
Posts: 186
Default

I have used Shell fuel for years without issue.

Fuel from the local Exxon comes from the same refinery as the local Shell station. The differences are the additives used.

One thing to be on the lookout for is general age of said gas station. I don't buy gas from an older facility. Jobbers can mess up and put the wrong fuel in the wrong holding tanks as well. It happens more often than one might think.

Find a station of your choosing and monitor logs periodically to see how the car is doing.

DirtyD's problem isn't fuel. He has too much timing in his tune for the fuel he is using. My recommendations via PM were to reduce timing and richen it up a hair.
wbt is offline   Reply With Quote
Old 10-24-2013, 11:48 AM   #14
46Tbird
Senior Member
 
46Tbird's Avatar
 
Join Date: Jun 2012
Posts: 697
Default

Shell is fine, QT is fine. Stay away from RaceTrac gas.

http://www.toptiergas.com/retailers.html
__________________
"If this was like, a thousand years ago, I'd be a Picasso. I'd be one of those dudes that cut his damned ear off."
46Tbird is offline   Reply With Quote
Old 10-24-2013, 12:08 PM   #15
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default

Originally Posted by JDBishopArts View Post
Stock plugs? Did you gap down?
I've never so much as touch the COPs with my fingers, let alone taken the plugs out. LOL
DirtyD is offline   Reply With Quote
Reply

Bookmarks




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump