| Suspension Post up questions about your Mustang's suspension or ride quality |
| Sponsored Ads |
|
|
Welcome to DFW50s.com
|
Register to remove these ads.
07-25-2014, 06:01 PM
|
#1
|
|
Member
Join Date: Feb 2014
Posts: 36
|
koni yellows and bmr springs ride
Im going to purchase koni yellow adjustables, bmr springs, panhard, uca and mount. If you're running the konis, bmr springs or both, how do you like it? Also, I want to install all of it myself, any pointers would be great.
|
|
|
|
07-25-2014, 08:56 PM
|
#2
|
|
Senior Member
Join Date: Mar 2013
Age: 34
Posts: 1,047
|
koni yellows and bmr springs ride
Everything is extremely easy except the Uca. I had mine installed but lift the car as high as you can and remove the over axle pipes to get better access to the Uca. Adjust the Uca with the suspension loaded up. As for everything else, follow the lmr video for springs. I don't have the yellows, but a lot of guys run several clicks off of full soft.
__________________
The Queen:
2013 Race Red Mustang GT 6MT: 20" AMR's, GT500 AB, JBA LT's and ORX, SCT SF3/X3, MGW Short Throw, Some Carbon Wrap, Spoiler Delete, Eibach Sportlines, Koni STR.T's, BMR LCA's, BMR Relo Brackets, BMR UCA, Freedom Racing PHB, Maximum Motorsports CC Plates, BMR Safety loop, DSS Aluminum DS
Last edited by JDMLOL; 07-25-2014 at 11:57 PM.
|
|
|
|
|
07-27-2014, 01:28 PM
|
#3
|
|
Senior Member
Join Date: Apr 2013
Location: Tejas
Posts: 356
|
Happy with my Koni yellows. Running them with Eibach pros.
Tips:
Best instructions I got were downloaded from American Muscle (c/w nut sizes so no fumbling for the right one). I think it was posted under the eibach pros.
Free spring compressor loaner from Autozone.
Air tools make the job so much easier, especially for removing / installing the strut nut.
Use Loctite blue.
Have not done UCA. Otherwise, fairly straightforward/simple job.
__________________
2014 GT Track Pack (300A) Black/Black, Recaros, Eibach Pro-kit, Koni adj (yellows), MM camber plates, Whiteline PHB & bracket, Whiteline adj rear sway,Hawk HP+, J+M SS lines,FRPP brake ducts, GT500 AB, 275/35/18 BFG Rivals on 18x10x43 D-force LTWs, Tint and blackout.
|
|
|
|
|
07-27-2014, 02:34 PM
|
#4
|
|
Member
Join Date: Jan 2013
Age: 35
Posts: 95
|
How is the ride quality Tortuga? I really want to lower my car but I absolutely love how comfortable the stock ride is. It's been a long time since I've had a car that rides this comfortably.
|
|
|
|
|
07-27-2014, 06:09 PM
|
#5
|
|
Senior Member
Join Date: Apr 2013
Location: Tejas
Posts: 356
|
Originally Posted by my95z28
How is the ride quality Tortuga? I really want to lower my car but I absolutely love how comfortable the stock ride is. It's been a long time since I've had a car that rides this comfortably.
|
Stiffer of course, but as the car is underdamped with stock springs it was noticeably worse when lowered with stock shocks and struts. E.g. some porpoising on the highway bump. Added the Koni's and I'm very happy. With the yellows's its back under control. End result is a firmer but well dampened ride. Not harsh at all.
__________________
2014 GT Track Pack (300A) Black/Black, Recaros, Eibach Pro-kit, Koni adj (yellows), MM camber plates, Whiteline PHB & bracket, Whiteline adj rear sway,Hawk HP+, J+M SS lines,FRPP brake ducts, GT500 AB, 275/35/18 BFG Rivals on 18x10x43 D-force LTWs, Tint and blackout.
|
|
|
|
|
07-27-2014, 11:21 PM
|
#6
|
|
Senior Member
Join Date: Jul 2014
Location: Lewisville
Posts: 101
|
Originally Posted by El_Tortuga
Stiffer of course, but as the car is underdamped with stock springs it was noticeably worse when lowered with stock shocks and struts. E.g. some porpoising on the highway bump. Added the Koni's and I'm very happy. With the yellows's its back under control. End result is a firmer but well dampened ride. Not harsh at all.
|
Cool, i just ordered yellow konis, eibach sport springs, with bmr LCAs and pan hard bar(on back-order…). Good to hear. Any suggestion on what hole to use on the relocation bracket for the LCA having a 2" drop in the back with a 1.3" in the front? Thanks.
|
|
|
|
|
07-28-2014, 12:59 AM
|
#7
|
|
Senior Member
Join Date: Aug 2012
Location: Wylie
Age: 37
Posts: 2,266
|
Originally Posted by Reaper
Cool, i just ordered yellow konis, eibach sport springs, with bmr LCAs and pan hard bar(on back-order…). Good to hear. Any suggestion on what hole to use on the relocation bracket for the LCA having a 2" drop in the back with a 1.3" in the front? Thanks.
|
I have the exact same setup and have it on the middle hole. Has worked fine for me so far lol
__________________
2013 Deep Impact Blue GT Premium
386rwhp/383rwtq
|
|
|
|
|
07-28-2014, 11:40 AM
|
#8
|
|
Senior Member
Join Date: Jul 2014
Location: Lewisville
Posts: 101
|
Originally Posted by 03MachMe
I have the exact same setup and have it on the middle hole. Has worked fine for me so far lol
|
Thank you! Just waiting on parts now…
|
|
|
|
|
07-27-2014, 04:11 PM
|
#9
|
|
Senior Member
Join Date: Mar 2013
Age: 34
Posts: 1,047
|
I never needed a spring compressor for mine... I guess it depends on the drop?
__________________
The Queen:
2013 Race Red Mustang GT 6MT: 20" AMR's, GT500 AB, JBA LT's and ORX, SCT SF3/X3, MGW Short Throw, Some Carbon Wrap, Spoiler Delete, Eibach Sportlines, Koni STR.T's, BMR LCA's, BMR Relo Brackets, BMR UCA, Freedom Racing PHB, Maximum Motorsports CC Plates, BMR Safety loop, DSS Aluminum DS
|
|
|
|
|
07-28-2014, 12:14 PM
|
#10
|
|
Member
Join Date: Feb 2014
Posts: 36
|
I've been reading mixed info about lca and uca and which is more important to have first. I've read that the uca and mount is more important because you can adjust pinion angle, thus saving your pinion seal and avoid other damage. Others have stated that having the lca's and relos are more important. What is your thoughts or opinions on this.
|
|
|
|
|
07-30-2014, 07:04 AM
|
#11
|
|
Senior Member
Join Date: Mar 2013
Age: 34
Posts: 1,047
|
Originally Posted by txfiremn
I've been reading mixed info about lca and uca and which is more important to have first. I've read that the uca and mount is more important because you can adjust pinion angle, thus saving your pinion seal and avoid other damage. Others have stated that having the lca's and relos are more important. What is your thoughts or opinions on this.
|
Correct pinion angle. I'm sure a lot of guys without an adjustable Uca on a lowered car haven't put enough miles on them to notice the negative effects yet.
__________________
The Queen:
2013 Race Red Mustang GT 6MT: 20" AMR's, GT500 AB, JBA LT's and ORX, SCT SF3/X3, MGW Short Throw, Some Carbon Wrap, Spoiler Delete, Eibach Sportlines, Koni STR.T's, BMR LCA's, BMR Relo Brackets, BMR UCA, Freedom Racing PHB, Maximum Motorsports CC Plates, BMR Safety loop, DSS Aluminum DS
|
|
|
|
|
07-28-2014, 01:14 PM
|
#12
|
|
Senior Member
Join Date: Apr 2013
Location: Tejas
Posts: 356
|
Adjustable LCAs can control the pinion angle too.
I just ordered relocation brackets witht he plan to try them with my track pack LCAs. When I install, I will measure pinion angle and decide if I will also do adj LCAs.
__________________
2014 GT Track Pack (300A) Black/Black, Recaros, Eibach Pro-kit, Koni adj (yellows), MM camber plates, Whiteline PHB & bracket, Whiteline adj rear sway,Hawk HP+, J+M SS lines,FRPP brake ducts, GT500 AB, 275/35/18 BFG Rivals on 18x10x43 D-force LTWs, Tint and blackout.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
Hybrid Mode