dfw

**brtnstrns** · 12-07-2013, 03:49 PM

Just wondering if there is a simpler proven way to remove window tint adhesive than to just scrape it off with a razor blade? Or should I just dish out the cash it will cost to have the tint adhesive removed and new tint installed by a pro?

**5-OH** · 12-07-2013, 04:16 PM

They use a steam machine which gets about 98% of it off then hit it with a blade to make sure it's all gone before re-tinting. If you need a good tint guy, let me know.

**PLASMAN** · 12-07-2013, 04:18 PM

I have used goo gone copiously followed by windex before and it worked well

**brtnstrns** · 12-07-2013, 04:37 PM

Originally Posted by 5-OH

They use a steam machine which gets about 98% of it off then hit it with a blade to make sure it's all gone before re-tinting. If you need a good tint guy, let me know.

So I've got a steam machine here at home. If I use that what is the exact process? Steam it for a bit then razor blade it off?

**five.slow** · 12-07-2013, 04:57 PM

Just watched a YouTube of them doing it with a steamer. Never knew that worked.

**5-OH** · 12-07-2013, 05:27 PM

Originally Posted by brtnstrns

So I've got a steam machine here at home. If I use that what is the exact process? Steam it for a bit then razor blade it off?

Peal a corner a bit then stick that steam wand under the film for a little bit and slowly start pulling it off.

**Dan12GT** · 12-07-2013, 05:48 PM

When I used to have a job tinting windows we used simple green and a razor. Dilute the simple green a bit.

**brtnstrns** · 12-07-2013, 06:47 PM

Originally Posted by 5-OH

Peal a corner a bit then stick that steam wand under the film for a little bit and slowly start pulling it off.

This would be simpler if the tint was still there. Unfortunately all I've got is glue.

**5-OH** · 12-07-2013, 07:12 PM

You would be correct, lol.

**brtnstrns** · 12-07-2013, 10:25 PM

ho lee fuk

Yeah, steam cleaner + razor blade = removing that adhesive like butter. Quite amazing. I'll probably have to buff and polish my windows now though since I'm sure they're probably slightly scraped in a few spots.

Damn, now I wanna try the steam cleaner on my engine bay.

**Dan12GT** · 12-08-2013, 01:04 PM

Originally Posted by brtnstrns

ho lee fuk

Yeah, steam cleaner + razor blade = removing that adhesive like butter. Quite amazing. I'll probably have to buff and polish my windows now though since I'm sure they're probably slightly scraped in a few spots.

Damn, now I wanna try the steam cleaner on my engine bay.

Wish I had this when I was trying to remove my clear bra 2 weeks ago. I was picking at it for 2 hours!

**04sleeper** · 12-08-2013, 08:25 PM

WD-40 and a NEW razor blade! Then Windex.

**thelandshark** · 12-08-2013, 11:53 PM

Glass cleaner and razoe blade just dont use a razor blade on rear window if u have rear defrost

**brtnstrns** · 12-09-2013, 04:35 PM

^took less than 15 minutes once the steam started going.