dfw

Gottop · 05-15-2014, 11:04 AM

Anyone know if a 315/35/20 has any problem clearing in the rear of the 2014? Of course with a 20x10 wheel

**rlhay2** · 05-15-2014, 11:14 AM

A wheel with the proper offset should not have any issues. It may require a lowered car to clear the bump stops.

Gottop · 05-15-2014, 11:18 AM

I think I am 95% sure I want to do the FR500 wheels in either black Chrome or Black with polished lip....

**DirtyD** · 05-15-2014, 11:22 AM

315 is a wide tire for a 10" wheel. You might be hard pressed to fit that. I know Josh Bishop had 315s on his 11" wheels and they were wide, but BFG Rivals also run widers than normal.

You might have to do some trimming in the wheel well on a bracket that is there from the factory as a lift point for the assembly line. But as rlhay said, finding the offset to make the wheel fit is key.

**Grandpa** · 05-15-2014, 11:30 AM

It will rub and the sidewalls will bulge on a 10 inch wheel.

Gottop · 05-15-2014, 11:39 AM

ok so my safe bet is a 295/35/20

**Grandpa** · 05-15-2014, 11:58 AM

Originally Posted by Gottop

ok so my safe bet is a 295/35/20

In my opinion, yes. I had a 305/35 on a 11 inch wheel and it was perfect flat side wall with no rubbing. Running a tire that bulges out is not only ugly as hell, but it's also dangerous.

Gottop · 05-15-2014, 12:28 PM

I agree... Cool now just to pick between the 2 wheels

**DirtyD** · 05-15-2014, 01:09 PM

295 is great for a 10" wheel, 305 for 11.

**garner** · 05-15-2014, 11:06 PM

Originally Posted by SlowGreyGT

In my opinion, yes. I had a 305/35 on a 11 inch wheel and it was perfect flat side wall with no rubbing. Running a tire that bulges out is not only ugly as hell, but it's also dangerous.

Must not be that dangerous or companies wouldn't do it from the factory. Of course may be different on cars vs trucks

OP as far as color, I think black chrome would look pretty cool

**DirtyD** · 05-16-2014, 09:02 AM

Originally Posted by garner

Must not be that dangerous or companies wouldn't do it from the factory. Of course may be different on cars vs trucks

OP as far as color, I think black chrome would look pretty cool

Way different when talking about wide truck tires on a smaller width rim. Also depends on the tire and sidewall design

**JDBishopArts** · 05-16-2014, 10:50 PM

Depends on the offset and the drop you're on. Don't need a 315 on a 10. 305/35 would be plenty of tire.

Gottop · 05-17-2014, 10:10 AM

Thanks JD. I checked with a buddy that works at LMR. He said 295 or 305 is fine just like it was in my 94

Also as far as tire on a car or a truck. Tire sizes don't change the way they work do to being on a SUV a truck or a sports car. It's rubber it don't know the difference. I was meaning will they rub on the inner fender.

I know some of you run a 285 on brembo wheels which are 9" wide rims. So a 10" wheel can take a 305 or a 315 easy. That's just math. But the question will they rub. On inside. But think to be safe and I am gonna go 295/35/20.

Gottop · 05-18-2014, 03:20 PM

ImageUploadedByTapatalk1400440789.006658.jpg

Well ended up ordering these. Got them for 800 shipped for 20x8.5 and 20x10. I hope they look good on there. Haven't seen tons of cars with these wheels.