Go Back   Dallas Fort Worth 5.0 Mustang Club > 5.0 Mustang Forum > Suspension

Suspension Post up questions about your Mustang's suspension or ride quality


Sponsored Ads
Welcome to DFW50s.com

Register to remove these ads.




 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-01-2013, 11:16 AM   #4
JDBishopArts
Senior Member
 
JDBishopArts's Avatar
 
Join Date: Aug 2012
Location: Valley Ranch
Age: 40
Posts: 1,123
Default

No big deal. What's what this site is for, to help people.

It's not technically going to hurt anything in the short term but it basically renders your LCA's useless. It will make your suspension worse.

I'd highly recommend not lowering your car till you get these things.

LCA's
LCA relocation brackets. (because the angle has to be corrected) These are more important than the LCA's themselves.
Adj Panhard. (when you drop the car the stock panhard is solid and will push the rear out of alignment)
CC plates or Camber bolts. (to correct front camber. Plates are better, bolts will do for short term)

Most people think a UCA is required but I feel that with the 2piece DS the pinion angle isn't that huge of an issue short term. It is def better and highly recommended long term. I plan on switching mine when I swap axles.

Also keep in mind a more aggressive spring is going to be harder on the shocks/struts. My stock ones lasted about 5k miles before one blew.
JDBishopArts is offline   Reply With Quote
 

Bookmarks




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump