Originally Posted by DarkHorse1350
Haven't been to the track yet with the new setup, but I plan to soon.
Would I use this bar again? Yes and no, yes because it is a VERY well built piece...once you set it up correctly of course. No, because if you are looking to have easy adjustments I would recommend BMR or Stallion with the mid bar adjusters. I feel that the solid bar is a sturdier piece so I can live with the adjusters on the ends.
I have had to take this bar off 3 different times to readjust but none were the bars fault, just me being a noob when it comes to adjustable suspension parts. I finally decided to use lock-tite on the lock nuts and have not had any rattles since and the body over axle alignment has not moved. I will be adding a 90* zirks fitting to the drivers side bushing housing to make for easier greasing when the time comes but that is no big deal.
Short answer is yes, I am still happy and would do it all over again.
|
I need to do the locktite on the nuts of my Freedom Racing bar. It's moved on me 3 times now, and I have to adjust it again...PITA....
Threaded Mode
