dfw

Ingot 5.0 · 12-15-2013, 09:47 PM

Thanks Dan...do that make hub centric in such small thicknesses?

Originally Posted by Dan12GT

Due to my wheel size I need to run a spacer. I should take the time to get a hub centric setup though. I've been running the 8mm spacers from AM since I got my wheels and was before on my stockers when I had caliper covers. Zero issues.

http://www.americanmuscle.com/14in-w...acer-pair.html

Granted I only have them on the fronts. Also if you can get 8 turns on the lug you should be fine, which I can get well beyond. However I would not recommend anything more than 8mm. I have a set of 8mm spacers if you ever want to give them a try before you buy.

Let me know.

**Dan12GT** · 12-16-2013, 12:10 AM

Originally Posted by Ingot 5.0

Thanks Dan...do that make hub centric in such small thicknesses?

Yes they do Josh (JDNishopArts) knows a guy that made him some. I need to go through him eventually too.