LED map lights installed

[DallasGator]

Originally Posted by re-rx7 You pull down the little plastic pieces not the whole cover. Use a flathead with a cloth.

Not quite. That is actually not right at all.

Originally Posted by Pat McCrotch To get the light cover off, do you just yank it down? Or is there a trick? I have tried to pull mine off but it feels like it's going to rip the damn headliner right off.

it really didn't take much force. Pull down from the front of the cover. I held the headliner while pulling the cover down but it didn't move much anyway. Americanmuscle.com has a good write up.

[re-rx7]

Originally Posted by DallasGator Not quite. That is actually not right at all. it really didn't take much force. Pull down from the front of the cover. I held the headliner while pulling the cover down but it didn't move much anyway. Americanmuscle.com has a good write up.

Well then you must have don alot more then neccasary because every place I looked at said that is how to do it. Thats exactly how I did it. Took all of 2 minutes. Work smarter not harder.

[DallasGator]

Originally Posted by re-rx7 Well then you must have don alot more then neccasary because every place I looked at said that is how to do it. Thats exactly how I did it. Took all of 2 minutes. Work smarter not harder.

http://mustangforums.com/forum/2005-...leds-pics.html

This shows how to put in bulbs that don't fit through the sockets. You still remove the entire assembly. That is the first step in either method. Unless you tried to pop off the clear plastic while the assembly is up, that is just asking to break it.