dfw

**STROKD** · 12-13-2013, 02:13 PM

Originally Posted by blownaltered

So I've been reading a bunch today about the 351 swap and there isn't as many different parts as I thought. My water pump, timing cover and other misc parts are still good. I would definitely need bigger heads and a different intake but I was already looking at that. I thought I was going to have to change my kmember but I don't so that makes a huge difference in what I can do.

Correct. You will need a new distributor and ac bracket, but heads, intake, headers etc you were upgrading anyway... nows the time to do it! That blower u have at 10 psi and pump should make 600 rw and have a ton of torque... dont know how much boost it will push but it will be easier to make good smooth power, and u can run a smaller cam so that makes it more driver friendly, and then u can run taller gears for better mpg too if u wanted...

blownaltered · 12-13-2013, 03:01 PM

Originally Posted by STROKD

Correct. You will need a new distributor and ac bracket, but heads, intake, headers etc you were upgrading anyway... nows the time to do it! That blower u have at 10 psi and pump should make 600 rw and have a ton of torque... dont know how much boost it will push but it will be easier to make good smooth power, and u can run a smaller cam so that makes it more driver friendly, and then u can run taller gears for better mpg too if u wanted...

I actually have an msd distributor sitting on my shelf in the garage for a 351w. I have a vic jr intake but it is for a carb motor not efi, so I will sell that to get some money for they new intake. Hell I still have a 750 double pumper sitting on my shelf from one of my old 351w.

**STROKD** · 12-13-2013, 03:06 PM

Originally Posted by blownaltered

I actually have an msd distributor sitting on my shelf in the garage for a 351w. I have a vic jr intake but it is for a carb motor not efi, so I will sell that to get some money for they new intake. Hell I still have a 750 double pumper sitting on my shelf from one of my old 351w.

If u go spyder style intake, u can use the one you have and have it converted. They drill holes and add the injector bungs and fuel rails attach to the bungs. This is how they are all done.