Originally Posted by my95z28
Wow their website is great! I was thinking 315 nittos, they tend to run a bit smaller. So a +45 is going to be more in toward the center of the car right? If so I might pick up some spacers to push them out a bit.
|
No they wont be center bro. They will be flush with the fender. You won't have any extra space. And spacers....
...this setup will be flush and clear all BBk. No need for spacers. And I guarantee a 305 will be max...possibly 295 Nitto type tire cause they are usually 2 to 5 mm smaller than others. my 20x10 with 42 and a 295 Nitto is completely flush and directly parallel to the fender so imagine so you can easily do the measurements on 10.5 with 45mm. Here's a website that can give you some sort of an idea.
http://rimsntires.com/specspro.jsp
You will need a rim with at lest +52 or higher to get a 315 Nitto like the Forgestar wheels. The all have +55 offset
Threaded Mode