Go Back   Dallas Fort Worth 5.0 Mustang Club > Sponsors and Vendors > Vorshlag Motorsports

Sponsored Ads
Welcome to DFW50s.com

Register to remove these ads.

Thread Tools Display Modes
Old 10-25-2013, 02:40 AM   #1
Senior Member
Join Date: Aug 2013
Location: Austin, TX
Posts: 178
Default Adjustable rear spring perch

What's the story on this, does it take something like a 2.5"ODx12" coilover spring? If so this could be something useful to me, the selection of so called drag springs is severely lacking.

NA 2011 GT Auto
[email protected]
Texas Mile - 152.8 half mile/180.0 mile
kdanner is offline   Reply With Quote
Old 10-28-2013, 02:40 PM   #2
modernbeat's Avatar
Join Date: Aug 2013
Age: 50
Posts: 34

They are built to take a 60mm spring and we often turn them down to take a 2.25" spring. We used to be able to get shims to keep a 2.5" spring from rattling on it, but they are not available any more and we have not yet tooled up to make our own.

Two ride height adjusters and two adapters to the S197 axle are $275. We usually pair them with an 8" or 9" spring depending on the spring rate and ride height.
Jason McDaniel at Vorshlag Motorsports
modernbeat is offline   Reply With Quote
Old 11-01-2013, 04:45 PM   #3
Join Date: Aug 2013
Location: OKC
Age: 31
Posts: 31

...and they're really well put together and easy to adjust

2012 GT- Brembos, 3.55's
AST 4150's, Hyperco 550F/250R springs, Torsen T2R, Vorshlag CC plates, Whiteline Sways,
18x11 Forgestar F14's
csamsh is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump