Post your Suspension mods

[Luke]

Originally Posted by Yagermeister Luke, Yes on the 4.10s. My car is an auto with a stock converter so my 60ft isn't what it could be compared to a manual but my best is a 1.77 in good weather this year

So when's the converter coming? I keep holding myself back from buying a 4C, the bug to go faster is an expensive bitch.

[Yagermeister]

Originally Posted by Luke So when's the converter coming? I keep holding myself back from buying a 4C, the bug to go faster is an expensive bitch.

Longtubes and Driveshaft hopefully within a month and then a converter with around 4200 stall hopefully during the summer sometime. Have a friend who had gone 11.71 (just a hair slower than me with similar setup) and just installed a 5C (4200 stall) and went down to 11.15 instantly with a few more tweaks to the tune

[Luke]

Originally Posted by Yagermeister Longtubes and Driveshaft hopefully within a month and then a converter with around 4200 stall hopefully during the summer sometime. Have a friend who had gone 11.71 (just a hair slower than me with similar setup) and just installed a 5C (4200 stall) and went down to 11.15 instantly with a few more tweaks to the tune

I've considered the 5C as well, when the time comes I'll give him a call and get his recommendation. I picked up a D/S on an SVT group buy, it's actually getting sent back soon. Driving down the road I got a horrible vibration and it got so bad that even riding the brake the car would shake. Had to put the stock shaft back in til they check it out and send me a replacement.

[Phuck Phace]

Originally Posted by Yagermeister Longtubes and Driveshaft hopefully within a month and then a converter with around 4200 stall hopefully during the summer sometime. Have a friend who had gone 11.71 (just a hair slower than me with similar setup) and just installed a 5C (4200 stall) and went down to 11.15 instantly with a few more tweaks to the tune

When are you going to start pulling wheels off the ground?

[Yagermeister]

Originally Posted by Phuck Phace When are you going to start pulling wheels off the ground?

According to the starter at Ennis, they got off the ground during the last trip. Here's a link to the video the starter took:

http://youtu.be/NL68d2J__6c

[Phuck Phace]

Originally Posted by Yagermeister According to the starter at Ennis, they got off the ground during the last trip. Here's a link to the video the starter took: http://youtu.be/NL68d2J__6c

Needs more air, drag that bumper!!!

[Yagermeister]

Originally Posted by Phuck Phace Needs more air, drag that bumper!!!

Once the converter goes in there will be much more air