Go Back   Dallas Fort Worth 5.0 Mustang Club > 5.0 Mustang Forum > Interior/Exterior

Interior/Exterior Post new mods or questions about the inside or outside of your mustang


Sponsored Ads
Welcome to DFW50s.com

Register to remove these ads.




Reply
 
Thread Tools Display Modes
Old 09-23-2013, 05:08 PM   #1
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default

All I see is a link to wheels...no tires.

You will get the typical RTR/Drift haters, but do what you want to do.

Eibach Pro kit will give you about 1", as will Ford P springs.

As for tires, Hankook Ventus V12, Continental ExtremeContact DW are good affordable tires, and if you want to spend a little more, Michelin Pilot Super Sports.
DirtyD is offline   Reply With Quote
Old 09-23-2013, 05:14 PM   #2
aalbrand
Junior Member
 
Join Date: Apr 2013
Posts: 12
Default

Originally Posted by DirtyD View Post
All I see is a link to wheels...no tires.

You will get the typical RTR/Drift haters, but do what you want to do.

Eibach Pro kit will give you about 1", as will Ford P springs.

As for tires, Hankook Ventus V12, Continental ExtremeContact DW are good affordable tires, and if you want to spend a little more, Michelin Pilot Super Sports.
Ughh, yes I knew after I posted tires on the thread, but was truly asking about rims, I would get that response. putting on the 24 hour burn for work, and just took a break to look at some nice toys for my car. I really like the matte charcoal or black finish rims of this style. Any suggestions? I definitely do not want to provoke any haters!
__________________
**************************************
2013 Deep Impact Blue 5.0
Mods: Coming Soon!
aalbrand is offline   Reply With Quote
Old 09-23-2013, 11:29 PM   #3
Dominic Toretto
Senior Member
 
Dominic Toretto's Avatar
 
Join Date: Jun 2013
Location: Irving / Oklahoma City
Age: 41
Posts: 1,896
Default

Originally Posted by aalbrand View Post
Ughh, yes I knew after I posted tires on the thread, but was truly asking about rims, I would get that response. putting on the 24 hour burn for work, and just took a break to look at some nice toys for my car. I really like the matte charcoal or black finish rims of this style. Any suggestions? I definitely do not want to provoke any haters!
First things first, don't worry about haters. No one here is helping you pay for your car, much less sponsor your mods . I personally like those rims (or that style anyway) but, the only reason I didn't get them is because they are a bit too common as far as aftermarket wheels are concerned. You will hardly see a Mustang with those wheels though, in your daily commute. Hell, about 95% of the Mustangs you may see will be stock. The most place you will see modded cars of any type will be online or at car meets.

I'd say go for the charcoal. To me, the all black wheel thing is getting played out very fast especially with stock cars coming that way from the factory now. As DirtyD stated, go with some Ford P Springs. Should something go wrong, you may be able to argue about warranty since they are a genuine Ford product. I got them for that reason and that I also wanted a 1inch drop. Tire sizing can be a little tricky as some manufacturers measurements are different than others. Sort of like buying shoes. I have seen a few cars with as wide as 315s on the back, lowered. Not sure what mods they had if they had to do anything to accommodate that. Millimeters to inches is 25.4/1. So for a 9.5inch wheel I would not recommend going any wider than a 275, but that is me. I have 10inch wide rears and bought 285s for those. I plan on getting either 255s or 265s for my front 9inch wide wheels.

-Alex
__________________
2012 GT Premium Hardtop with XX Transmission
Mods page: http://dfw50s.com/showthread.php?t=3376

Ford Racing . Pypes . BMR . CDC . American Muscle . DDM Tuning . BFG . J&M . Amsoil . MMD. JLT
Dominic Toretto is offline   Reply With Quote
Old 09-25-2013, 04:04 PM   #4
aalbrand
Junior Member
 
Join Date: Apr 2013
Posts: 12
Default

Originally Posted by Dominic Toretto View Post
First things first, don't worry about haters. No one here is helping you pay for your car, much less sponsor your mods . I personally like those rims (or that style anyway) but, the only reason I didn't get them is because they are a bit too common as far as aftermarket wheels are concerned. You will hardly see a Mustang with those wheels though, in your daily commute. Hell, about 95% of the Mustangs you may see will be stock. The most place you will see modded cars of any type will be online or at car meets.

I'd say go for the charcoal. To me, the all black wheel thing is getting played out very fast especially with stock cars coming that way from the factory now. As DirtyD stated, go with some Ford P Springs. Should something go wrong, you may be able to argue about warranty since they are a genuine Ford product. I got them for that reason and that I also wanted a 1inch drop. Tire sizing can be a little tricky as some manufacturers measurements are different than others. Sort of like buying shoes. I have seen a few cars with as wide as 315s on the back, lowered. Not sure what mods they had if they had to do anything to accommodate that. Millimeters to inches is 25.4/1. So for a 9.5inch wheel I would not recommend going any wider than a 275, but that is me. I have 10inch wide rears and bought 285s for those. I plan on getting either 255s or 265s for my front 9inch wide wheels.

-Alex
Thanks Alex, this is great info. I think I will go for the 275's for tires. I am going to continue to browse around for Rims. Also, thanks for the info on the springs, that is really good to know! When all this goes down, I will start posting some pics
__________________
**************************************
2013 Deep Impact Blue 5.0
Mods: Coming Soon!
aalbrand is offline   Reply With Quote
Reply

Bookmarks




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump