Go Back   Dallas Fort Worth 5.0 Mustang Club > 5.0 Mustang Forum > Suspension

Suspension Post up questions about your Mustang's suspension or ride quality


Sponsored Ads
Welcome to DFW50s.com

Register to remove these ads.




Reply
 
Thread Tools Display Modes
Old 03-20-2014, 02:05 PM   #1
Varilux
Member
 
Varilux's Avatar
 
Join Date: Jun 2013
Location: Hickory Creek, TX
Age: 56
Posts: 38
Default Installed LCAs (and Roush splitters), now THAT's better!

After seeing some reduction in wheel hop after installing the Ford Racing P springs, I decided to try and further improve things by installing some SR Performance LCAs (I also threw some Roush chin and side splitters on at the same time just to have something visible to look at).

I would say the hop has been reduced to <10% of the factory set-up. Now instead of hopping, I just spin. Seriously, you would think the Pirelli P-Zeros would manage to grip better- I can induce fishtailing in 1st, 2nd, and even 3rd gears (if traction is this fleeting at around 430hp, I can't imagine how the 660+hp Shelbys are even driveable).

The installation wasn't all that bad (just have to do one side at a time to avoid having the axle move during install). Getting the front bushings into the mounting location is definitely tight- but I guess that's the point. LCA install took about 1.5 hours total on jack stands. Its probably not possible to get the 129 ft/lb of torque without a breaker bar (tightest I've ever had to get a bolt).

The ride is DEFINITELY firmer in the back with the stiffer springs and LCAs, and it feels great going through a curve (going around on ramps at high speed makes me wish I had gotten the Recaros- but I wanted red seats... is it possible to hook up a four point harness with the stock seats?).

We ran down to College Station over the weekend to purchase our daughter's first car (an '06 Mustang- that gives us a '65, '03, '06, and '14 in the driveway- along with our '11 F150... starting to look like a Ford dealership ), and it didn't seem any noisier than the stock set-up (made driving along the twisty back roads along the way fun, though).
Attached Images
File Type: jpg LCA comp.jpg (100.1 KB, 28 views)
File Type: jpg Roush installed1.jpg (68.0 KB, 31 views)
File Type: jpg Mustang Saras.jpg (132.7 KB, 30 views)
__________________

'65 Coupe Silver Smoke Grey, Red interior, 200 I-6, T-5spd
'03 Convertible Silver Metallic, grey interior, V6
'14 GT Coupe, Sterling Gray, Brick Red interior, 5.0, 6M

Last edited by Varilux; 03-20-2014 at 02:47 PM.
Varilux is offline   Reply With Quote
Old 03-20-2014, 02:49 PM   #2
donutninja
Senior Member
 
donutninja's Avatar
 
Join Date: Oct 2013
Location: Coppell
Posts: 193
Default

Looking good!!
donutninja is offline   Reply With Quote
Old 03-20-2014, 07:17 PM   #3
zsommer79
Senior Member
 
Join Date: Dec 2013
Age: 45
Posts: 127
Default

Originally Posted by Varilux View Post
I can induce fishtailing in 1st, 2nd, and even 3rd gears (if traction is this fleeting at around 430hp, I can't imagine how the 660+hp Shelbys are even driveable).
I don't think the wheel hop is nearly as bad in the Shelby as the GT, but the fishtailing is worse for sure.
zsommer79 is offline   Reply With Quote
Old 03-20-2014, 11:09 PM   #4
KurvStr8nr
Senior Member
 
KurvStr8nr's Avatar
 
Join Date: Nov 2013
Location: McKinney
Posts: 148
Default

The reason you don't have wheel hop is because you reduced the dynamic load on the rear wheels when you lowered the car (which alters LCA geometry) which makes it spin the tires more easily. If you want to get your grip back, install some LCA relocation brackets to correct the rear end goemetry. You can get them from Vorshlag (Whiteline mfg'd).
__________________
| 2013 GT Prem | Ingot Silver | Track Pack | 6MT | 3.73 | Torsen | Recaros | Boss Diffuser |
| BMR SP009 Springs | BMR LCA Relo | Whiteline PHB | CS Pedestal Spoiler | LeMans Stripes (Big Worm Graphix) |

Coming soon: | MGW 2014 MT-82 Shifter |
KurvStr8nr is offline   Reply With Quote
Old 03-20-2014, 11:13 PM   #5
Varilux
Member
 
Varilux's Avatar
 
Join Date: Jun 2013
Location: Hickory Creek, TX
Age: 56
Posts: 38
Default

If you want to get your grip back, install some LCA relocation brackets to correct the rear end goemetry.

Thanks for the tip! While the spinning is definitely better than the wheel hop, its still keeping me from putting the power to the ground. I'll have to look into relocating the brackets as you suggest! As it is, it just feels like the rear is going to go round on me when I punch it in 2nd.
__________________

'65 Coupe Silver Smoke Grey, Red interior, 200 I-6, T-5spd
'03 Convertible Silver Metallic, grey interior, V6
'14 GT Coupe, Sterling Gray, Brick Red interior, 5.0, 6M
Varilux is offline   Reply With Quote
Old 03-20-2014, 11:33 PM   #6
re-rx7
Banned
 
Join Date: Apr 2013
Location: Gainesville,Tx
Age: 38
Posts: 2,405
Default

Originally Posted by KurvStr8nr View Post
The reason you don't have wheel hop is because you reduced the dynamic load on the rear wheels when you lowered the car (which alters LCA geometry) which makes it spin the tires more easily. If you want to get your grip back, install some LCA relocation brackets to correct the rear end goemetry. You can get them from Vorshlag (Whiteline mfg'd).
Looking into this.
re-rx7 is offline   Reply With Quote
Old 03-20-2014, 11:33 PM   #7
KurvStr8nr
Senior Member
 
KurvStr8nr's Avatar
 
Join Date: Nov 2013
Location: McKinney
Posts: 148
Default

Go talk to the guys over at Vorshlag. They can help you solve any suspension / traction problem you have - good stuff and they know what they are doing.
__________________
| 2013 GT Prem | Ingot Silver | Track Pack | 6MT | 3.73 | Torsen | Recaros | Boss Diffuser |
| BMR SP009 Springs | BMR LCA Relo | Whiteline PHB | CS Pedestal Spoiler | LeMans Stripes (Big Worm Graphix) |

Coming soon: | MGW 2014 MT-82 Shifter |
KurvStr8nr is offline   Reply With Quote
Old 03-21-2014, 09:34 AM   #8
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default

Originally Posted by KurvStr8nr View Post
The reason you don't have wheel hop is because you reduced the dynamic load on the rear wheels when you lowered the car (which alters LCA geometry) which makes it spin the tires more easily. If you want to get your grip back, install some LCA relocation brackets to correct the rear end goemetry. You can get them from Vorshlag (Whiteline mfg'd).
^This.

It also helps to have some actual tires under there too. Those Pirellis aren't known to be grip machines.
DirtyD is offline   Reply With Quote
Old 03-21-2014, 11:51 AM   #9
Varilux
Member
 
Varilux's Avatar
 
Join Date: Jun 2013
Location: Hickory Creek, TX
Age: 56
Posts: 38
Default

Well, I know the Pirellis are useless in the cold (drove 19 miles down I-35 to work on one of the 18 degree ice days... scariest ride I've ever had). I was assuming they are supposed to be extremely grippy on warm days. What is Ford's rationale for including them with the Track Pack?

I'm looking forward to wearing them out so I can put some Continental ExtremeContact DWS tires on there- I've had them on 3 different vehicles, and they are tremendous.
__________________

'65 Coupe Silver Smoke Grey, Red interior, 200 I-6, T-5spd
'03 Convertible Silver Metallic, grey interior, V6
'14 GT Coupe, Sterling Gray, Brick Red interior, 5.0, 6M
Varilux is offline   Reply With Quote
Old 03-21-2014, 12:23 PM   #10
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default

Originally Posted by Varilux View Post
Well, I know the Pirellis are useless in the cold (drove 19 miles down I-35 to work on one of the 18 degree ice days... scariest ride I've ever had). I was assuming they are supposed to be extremely grippy on warm days. What is Ford's rationale for including them with the Track Pack?

I'm looking forward to wearing them out so I can put some Continental ExtremeContact DWS tires on there- I've had them on 3 different vehicles, and they are tremendous.
Because Ford has a contract with Pirelli for a lot of their "higher end" tires on vehicles. There are some Pirellis that are excellent, but the P Zero that come on the Brembo and Track Pack aren't as good as they should be for a car like ours.

Also, on those Continentals, are you getting DW or DWS? The DWS is an all season, so grip will be marginal. You would want the DW as it's the summer tire.
DirtyD is offline   Reply With Quote
Old 03-21-2014, 02:55 PM   #11
Varilux
Member
 
Varilux's Avatar
 
Join Date: Jun 2013
Location: Hickory Creek, TX
Age: 56
Posts: 38
Default

I've always ordered the DWS tires over the DWs (because the tread wear is about twice as long). I've never had any traction issues with the DWS tires, and one set was on a tuned turbocharged Saab 9-3 Aero that spun tires like crazy (the 2.8T V6 in those cars was quite a nice setup). The side walls aren't as stiff as they could be for cornering, but otherwise its the perfect tire.
__________________

'65 Coupe Silver Smoke Grey, Red interior, 200 I-6, T-5spd
'03 Convertible Silver Metallic, grey interior, V6
'14 GT Coupe, Sterling Gray, Brick Red interior, 5.0, 6M
Varilux is offline   Reply With Quote
Old 03-21-2014, 03:00 PM   #12
DirtyD
Senior Member
 
Join Date: Jun 2012
Posts: 5,594
Default

I'm just not quite sure about using an all-season tire on a 3800#, 400 hp, RWD sports car.
DirtyD is offline   Reply With Quote
Old 03-21-2014, 05:54 PM   #13
garner
Senior Member
 
Join Date: Jul 2013
Location: Harker Heights, TX
Age: 30
Posts: 377
Default

All seasons aren't that bad. My 235 Yokohama yk580 cut the same 60 ft as my 275 sumitomo htrz3, 2-2.1. Plus the yk feel a lot safer on the streets. But there's definitely better out there for sure, just depends on driving style and budget
__________________
'14 5.0
garner is offline   Reply With Quote
Old 03-23-2014, 02:43 PM   #14
Crimson600+HP
Senior Member
 
Crimson600+HP's Avatar
 
Join Date: Oct 2013
Location: CENTEX
Age: 36
Posts: 378
Default

For daily driving and occasional spirited street driving, a high performance all season is all these cars need. I run them for when I'm driving my car on the street just fine. In reference to their performance on the track, I would never run them. You won't be able to keep up with anyone when trying to keep up inn the twists, brake zones, or when rolling on the throttle during track out.
__________________
- Jeff
_____________________________________________
2013 GT Premium|Brembo|MT82
ProCharger P1SC Stage 2|Full Suspension|New Plans: NA CJ Intake Manifold/OR H Pipe/3.73 Gears
Road Raced|Auto-X'd
Drag Raced|12.4s @ 119.7
Texas Mile|1/2 Mile: 140.3|1 Mile: 166.4|She had more in her!
Crimson600+HP is offline   Reply With Quote
Old 03-23-2014, 03:01 PM   #15
Brn N Rubr
Member
 
Join Date: Jun 2013
Location: Burleson,TX
Age: 40
Posts: 49
Default

As far as your other question goes, you can bolt in a complete 5-point harness in the car with no modifications. They make a harness bar for the the shoulder straps that mounts to the stock shoulder strap mounts. They also make an anti-sub belt mount that bolts in between the stock from seat mounts.
__________________
Competition Orange 2015 GT 401A with Performance Pack and Recaros.
Brn N Rubr is offline   Reply With Quote
Reply

Bookmarks




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump