Continued from above
+
ST3/TT3 2013 Mustang GT Build - We will keep adding to this S197 build thread with new content, like the race prep we are doing to Jamie Beck's 2013 Mustang for NASA ST3/TT3. In the next few weeks this car is getting an AJ Hartman wing and custom uprights, custom end plates, then a cage and starting on a major diet. We've already got it down to 3276 pounds and haven't even touched the glass or removed any stock sheet metal - this is all from
just removing factory interior parts. We will document every pound coming out of this car from here on out (and will show how it is
already at 3276).
+
Repairs and Updates after Hallett - After my simple "off and on" at Hallett I damaged a few exterior bits. The "pushed back" splitter was removed, some duct work was replaced, and we even added and upgraded some aluminum panels hidden under the bumper cover (a lower panel was added), the splitter mounts were fixed, etc. I tear up things and Vorshlag techs fix it. Rinse, repeat.
+
Adding a fire bottle & quick-release mount - After seeing the smoke pour out of the hood on our Mustang at Hallett (luckily it was only steam), then seeing cars at Pikes Peak + Hallett get burned from small engine fires that turned into larger ones due to a lack of a fire bottle, I figured it was past time. We have rounded up an affordable 2.5 pound bottle and it will be mounted in the car on a quick-release mount at the passenger side of the trans tunnel. That way I don't have to drive a car ON FIRE to a corner station to try to find a fire extinguisher if something happens. The fireball below was from a car we worked on (aero work + cage mods) that since entered the 2014 Pikes Peak event. About $120 investment in a fire bottle & mount can potentially save you thousands in fire damage. Will cover this more in the next update (they just finished it an hour ago - looks great).
+
New search for a HANS continues - I've scratched two off the list but there are many more. I know about all of the options, but what I would like is to borrow a couple more and
try them out. So far I am thoroughly unimpressed with how much these restrain my head movement in the car.
+
Two sets of prototype AST S197 coilovers - These
just went up for sale today in our
Clearance section. There's also some other new additions for slightly used S197 parts in there. Vorshlag is once again an AST/Moton dealer but the new U.S. distributor doesn't have any inventory in the USA yet (and might not for weeks or months). But we have recently taken in (on trade) a couple of special sets of prototype ASTs, including the first (and possibly only) set of AST 4200s for the S197 chassis as well as the first set of 4150 prototypes that we used on our 2011 GT for two years. Both sets have been checked out and are good to go, and you can add camber plates, springs and ride height adjusters to get a killer set of monotube adjustables on your car for a big savings over new AST or MCS prices. Details are at the links below for each set.
Left: Prototype AST 4150 shock set for S197 (from my car!). Right: Prototype (and only) AST 4200 shock set for S197
+
MCS deal for BMWs and S197 from July 7th to August 4th - If you order an MCS set for any S197 Mustang, BMW E30, BMW E36 or BMW E46 during this time frame there is a $100 savings on the optional rear spring kits, to help introduce the new Vorshlag rear ride height platforms.
+
New S197 Fender Flare Kit Under Development - Our friends at Heritage have taken what they learned making the custom steel rear flares on our Mustang and have replicated this for another one of our customers, but also added custom
front flares and a lot of "Extra Aero Pieces" to finish the wide body look off. They are pulling molds off of this car below and will offer composite offerings for all of this "soon". I will cover more of this in my next update, when hopefully the car below is painted/finished and the molds are ready. The plan is to get them to make the first set of composite front fenders for our car before SEMA. Fingers crossed...
+
Vorshlag Attends Drift vs Grip Event - I was going to cover that in this update but ran out of time. This was a Lone Star Drift event with a "5 lap battle" between the fastest drift cars and a few NASA TT drivers. It was UGLY, but we all had a lot of fun, and I'll show video and pics of this event next time. Here's some preview pictures of me driving like a jackass.
+
Vorshlag Skipping NASA Nationals East
After a lot of internal debate we have decided to skip the NASA Nationals event being held August 31st at Road Atlanta. There are several reasons. First, this "split Nationals" (East and West coast) is kind of lame and winning either one only makes you a "half champion". It was a novel idea but I don't want to spend the money and take the risks to do just the East event. That's the second reason - Risk. After looking at the carnage from Hallett, which has very little runoff area but low overall speeds, I am not comfortable going to Road Atlanta without a cage. This is another track with little runoff but HIGH speeds. Too many concrete K-walls and rough gravel traps (there should not have been an 18" drop into/out of that gravel trap) will keep me away until we have a caged car, and a better reason to go back and risk breaking something on my body again. Third is - Car Damage. I have a buyer lined up for the 2011 Mustang after SEMA, and I cannot afford to wad it up at Road Atlanta and ruin the car and the buyers future plans for it.
Road Atlanta (left) is hilly, fast, and unyielding. The LVMS 2.4 mile outfield course (right) is flat, slower speeds, and much safer
Instead of spending thousands of dollars going to Road Atlanta we are going to focus on the 2014 Optima Ultimate Street Car shootout (which we snagged an invitation to after winning the March USCA event) at LVMS in November. We will go and do a test event there as well. After that event the 2011 GT will be sold so we can focus on other projects (like the 2015 Mustang) and to help expand our business. Selling this 2011 Mustang helps us get into a bigger building, which we badly need. Ideally we would go to NASA Nats and give it a shot, but the reward just isn't worth the risk this time. Sorry...
So that's enough for this time. Stay tuned for more!
Hybrid Mode
