Dallas Fort Worth 5.0 Mustang Club
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   General Discussions (http://www.dfw50s.com/forumdisplay.php?f=10)
-   -   ~04sleepers build thread~ (http://www.dfw50s.com/showthread.php?t=1622)

Grandpa 05-01-2013 06:14 AM
~04sleepers build thread~
 
And it begins..


Quote:
Originally Posted by 04sleeper (Post 13021245)
Thanks guys!


Got some more work done today.

Since I was removing the K-Member, I decided to use the factory strut tower along with some come along straps to help hold the motor. I put them near the ends where it had more support from the towers. Worked perfect!

http://farm9.staticflickr.com/8121/8...cbd65275_b.jpg

The crank pulley has 3 bars that I used 2 of them to hook to.
http://farm8.staticflickr.com/7055/8...d0790c9e_b.jpg

With the engine supported, I unhooked the steering and dropped the K-Member.
http://farm8.staticflickr.com/7052/8...1e3e9ef1_b.jpg

That left room to pull the oil pan off so I can have fittings put in properly without punching holes in it and using the tap. I am not a fan of that technique.
http://farm9.staticflickr.com/8124/8...bd59ee16_b.jpg

http://farm8.staticflickr.com/7051/8...fd5e26a3_b.jpg

By removing the K-Member and motor mounts, it made it much easier to get to the headers. For the passenger side I had to CAREFULLY coerce the A/C line a little to get to the front bolt. But it went easy enough with little drama.
http://farm8.staticflickr.com/7046/8...9e60f3d3_b.jpg

http://farm9.staticflickr.com/8535/8...5260224a_b.jpg

http://farm9.staticflickr.com/8124/8...3ddf79b8_b.jpg

Here's a good shot of the front factory Wideband O2's.
http://farm8.staticflickr.com/7044/8...27f635b0_b.jpg

That's all for now. Will keep updating as things come together.

Grandpa 05-01-2013 06:16 AM
The black wheels are gone too! *happy dance*

blownaltered 05-01-2013 07:50 AM
I liked the black wheels on that car.

BlueBolt 05-01-2013 08:57 AM
Sub'd. Really like this car.

Bearded Banger 05-01-2013 09:13 AM
~04sleepers build thread~
 
Can't wait to see this all come together!

Grandpa 05-01-2013 09:33 AM
Quote:
Originally Posted by blownaltered (Post 28118)
I liked the black wheels on that car.
You also have 4 lug Cobra wheels, a whale tail from 1987, porno red interior with bright white captain chairs from Gary's rape van. I'll take you liking the black wheels with a grain of salt. :happy107:

Phuck Phace 05-01-2013 09:35 AM
What's the Aluminators block rated at?

STROKD 05-01-2013 09:46 AM
Can't wait to see this done, Kevin is a master at this craft, it will look like Ford installed it yet all shiney.

I liked the black wheels too because of the graphics, but if it were my car I would have had paint matched white wheels... Always loved white wheels on white cars, wife had TONS of compliments on her old fox with white "Bullets"..

blownaltered 05-01-2013 10:07 AM
Quote:
Originally Posted by Steve (Post 28129)
You also have 4 lug Cobra wheels, a whale tail from 1987, porno red interior with bright white captain chairs from Gary's rape van. I'll take you liking the black wheels with a grain of salt. :happy107:
That's ok Steve, my car is still going to bust one off in you cars ass this weekend. You can tell me how the whale tail looks like from behind.

Grandpa 05-01-2013 10:21 AM
Quote:
Originally Posted by blownaltered (Post 28136)
That's ok Steve, my car is still going to bust one off in you cars ass this weekend. You can tell me how the whale tail looks like from behind.
LOL, funny. I suspect your race record is going to look very similar to your submission record against me. :lol::lol::lol:

46Tbird 05-01-2013 11:00 AM
What wheels is he going to put on it?

Sweet build. And Jesus that thing is immaculate.

Grandpa 05-01-2013 11:02 AM
Quote:
Originally Posted by 46Tbird (Post 28146)
What wheels is he going to put on it?

Sweet build. And Jesus that thing is immaculate.
You will just have to wait and see. :)

Did you ever see his build threads on his Cobra?

03MachMe 05-01-2013 11:06 AM
Re: ~04sleepers build thread~
 
Can't wait. I would love to buy the black wheels from him but no way I can afford it

Grandpa 05-01-2013 11:29 AM
Quote:
Originally Posted by 03MachMe (Post 28148)
Can't wait. I would love to buy the black wheels from him but no way I can afford it
They've already been sold and shipped. Kevin doesnt mess around with his projects. :rotflmao:

46Tbird 05-01-2013 11:30 AM
Quote:
Originally Posted by Steve (Post 28147)
You will just have to wait and see. :)

Did you ever see his build threads on his Cobra?
Of course, and it was nice too. Did he buy that car new as well?

Grandpa 05-01-2013 11:44 AM
Quote:
Originally Posted by 46Tbird (Post 28157)
Of course, and it was nice too. Did he buy that car new as well?
No.

Luke 05-01-2013 02:18 PM
Good to see he's doing the oil lines the right way, the tapped pan thing is shitty, I had to do that with an old S-Trim. Does he have a timeline for when he wants to be done?

Grandpa 05-01-2013 02:27 PM
Kevin, you can feel better buddy. It got the Luke seal of approval that you are doing things correctly! *WHEW!*

Luke 05-01-2013 02:33 PM
Quote:
Originally Posted by Steve (Post 28171)
Kevin, you can feel better buddy. It got the Luke seal of approval that you are doing things correctly! *WHEW!*
Damn let it go already, can you answer the timeline question though?

Grandpa 05-01-2013 02:43 PM
Quote:
Originally Posted by Luke (Post 28172)
Damn let it go already, can you answer the timeline question though?
He has no expectations of a schedule since he will only be able to work on it in his rare spare time. He travels for work during the week and then still has a family at home to spend time with on the weekends. He is also tuning part time to make the extra project money which obviously takes time away as well.

In short, it will be done when it gets done. Then it will be submitted for your all knowing approval.

BLK2012GT 05-01-2013 03:03 PM
So are we going to turn his thread all gay like mines and David's?

Grandpa 05-01-2013 03:12 PM
Quote:
Originally Posted by BLK2012GT (Post 28175)
So are we going to turn his thread all gay like mines and David's?
No. I answered his question.


I'm looking forward to see what/how Kevin does the tuning on this thing. I know he's looking forward to tinkering with the tune as well. I'm thinking 700rw on 7lbs of boost should be an easy task on e85.

46Tbird 05-01-2013 03:39 PM
Quote:
Originally Posted by Steve (Post 1734)
Its a good group of guys here. We're all here to have a good time and attend events together. There is other boards for those interested in drama and smack talk.
:troll3:

merlinmol 05-01-2013 03:47 PM
Very excited about this build, following it on SVT

Grandpa 05-01-2013 03:58 PM
Quote:
Originally Posted by 46Tbird (Post 28180)
:troll3:
LOL, it's good natured fun here and not mean spirited or going after members real lives unlike other places.

STROKD 05-01-2013 05:03 PM
Quote:
Originally Posted by Steve (Post 28182)
LOL, it's good natured fun here and not mean spirited or going after members real lives unlike other places.
Pretty much. You set the trap on that one and I played the truth card and got it thrown in my face... Figured it was better than lying saying something stupid like - had other plans or something even more lame.

04sleeper 05-01-2013 08:29 PM
Should be a fun build. I am looking forward to it. I will keep you updated as it comes together.

I ordered bulk head fittings for the oil pan and ordered restrictors for the oil feed line to the turbos the other day.

I will get some pictures up tomorrow of the kit.

46Tbird 05-01-2013 09:18 PM
Quote:
Originally Posted by STROKD (Post 28185)
Pretty much. You set the trap on that one and I played the truth card and got it thrown in my face... Figured it was better than lying saying something stupid like - had other plans or something even more lame.
huh?

Grandpa 05-01-2013 09:38 PM
Quote:
Originally Posted by 46Tbird (Post 28196)
huh?
Don't worry about it. Something between Matt and I.

Emwun Garand 05-02-2013 01:12 AM
Wrong forum

BlueBolt 05-02-2013 08:14 AM
04sleeper why did you get rid of those wheels? Your car looks sick in your sig

04sleeper 05-02-2013 07:19 PM
.....

BlueBolt 05-02-2013 08:42 PM
Lol. Good enough

04sleeper 05-04-2013 10:18 PM
.....

Toby 05-04-2013 10:55 PM
Nice work Kevin.

04sleeper 05-05-2013 07:58 AM
.....

blownaltered 05-05-2013 11:40 AM
Looks good. You've made a lot of progress since I was there on Friday. Thanks again for rolling the wheel wells on the fox. She doesn't scrape the tires anymore.

Grandpa 05-05-2013 12:04 PM
Quote:
Originally Posted by blownaltered (Post 28609)
Looks good. You've made a lot of progress since I was there on Friday. Thanks again for rolling the wheel wells on the fox. She doesn't scrape the tires anymore.
You didn't tell me you had the parts in your trunk all day yesterday!

merlinmol 05-05-2013 12:05 PM
Looking good, keep the updates coming.

blownaltered 05-05-2013 12:08 PM
Quote:
Originally Posted by Steve (Post 28610)
You didn't tell me you had the parts in your trunk all day yesterday!
They weren't, they are sitting in my garage. I forgot to tell you to come back by. Oops


All times are GMT -4. The time now is 07:28 PM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.