Dallas Fort Worth 5.0 Mustang Club

Dallas Fort Worth 5.0 Mustang Club (http://www.dfw50s.com/index.php)
-   Suspension (http://www.dfw50s.com/forumdisplay.php?f=32)
-   -   Whiteline rear sway bar kit (http://www.dfw50s.com/showthread.php?t=4583)

JARVIS 09-11-2014 07:13 PM

Whiteline rear sway bar kit
 
1 Attachment(s)
So I installed the kit and had some issues with the u clamps tightening all the way. I ended up having to replace them and installed new ones as they stripped due to movement. It seems to be holding up prior to shipping it but still worried it may strip again over time or cause damage to the axle. Is there another clamp I could use instead of c clamps to connect it better to the axle? Thanks

El_Tortuga 09-11-2014 07:49 PM

Quote:

Originally Posted by JARVIS (Post 74663)
So I installed the kit and had some issues with the u clamps tightening all the way. I ended up having to replace them and installed new ones as they stripped due to movement. It seems to be holding up prior to shipping it but still worried it may strip again over time or cause damage to the axle. Is there another clamp I could use instead of c clamps to connect it better to the axle? Thanks

All these clamps do is hold a the bar in place for a pivot point. No issues with mine other than an endlink that the locking nut backed off.

Loctite is your friend.


All times are GMT -4. The time now is 07:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.