Originally Posted by Yagermeister
Call Kelly again...He always tells me top or middle at the most never the bottom hole. Currently the top hole is used due to near stock springs...tried the middle and hooked too good. Heard crunching and car pulled hard to one side. Went back to the top hole and the issue went away and 60' went back down...can't get greedy!
|
Well yeah he suggested since I am only lowered an inch, to go with the middle. As my car sits now with stock LCAs the angle of the LCA is upward toward the rear, as if it is on the top setting if my relocation brackets were installed now but, they are still in the box. So to get the LCAs back to an completely horizontal the middle would be the best selection.
You basically confirmed my research was correct, the lower setting the greater the traction.
-Alex