Dallas Fort Worth 5.0 Mustang Club - View Single Post

**Rydawg1** · 11-23-2013, 08:47 PM

Since installing the VMP TVS kit, this is the first time being on the dyno. I made 2 pulls and this is the 1st pull. It made 583rwhp & 524rwtq on 93 pump gas (QT). I noticed at ~3,500 RPM's the torque curve dips just a tad.

I was able to data log the dyno pulls. This screenshot shows the reason for the dip. At ~3,500 RPM the Knock Sensor spiked to 2.61. I only highlighted Knock Sensor, RPM, SA and SA v2 for the graph. The other information is in there but you'll need to click the pic, then "+" to view and read all of the other numbers.

I was guessing it would make around 550rwhp. So needless to say I was pleasantly surprised with these numbers. I'm very happy with VMP, their 5.0 TVS solution and would definitely recommend it!

11-23-2013, 08:47 PM	#31
Rydawg1 Senior Member Join Date: Apr 2013 Location: Keller, TX Age: 53 Posts: 213	Since installing the VMP TVS kit, this is the first time being on the dyno. I made 2 pulls and this is the 1st pull. It made 583rwhp & 524rwtq on 93 pump gas (QT). I noticed at ~3,500 RPM's the torque curve dips just a tad. I was able to data log the dyno pulls. This screenshot shows the reason for the dip. At ~3,500 RPM the Knock Sensor spiked to 2.61. I only highlighted Knock Sensor, RPM, SA and SA v2 for the graph. The other information is in there but you'll need to click the pic, then "+" to view and read all of the other numbers. I was guessing it would make around 550rwhp. So needless to say I was pleasantly surprised with these numbers. I'm very happy with VMP, their 5.0 TVS solution and would definitely recommend it! __________________ 2013 SG 400A GT Premium w/Brembos, VMP TVS 2.3 stage 2, Fore return style fuel system, ID1000's, 20" Shelby CS70's, Eibach Pro System Suspension Kit, BMR K member, UCA, LCA, adj. Pan hard Bar, Shaftmaster Aluminum Driveshaft, McLeod RXT twin disc clutch, McLeod lightened steel flywheel, MBRP race exhaust with Lethal O/R H, JLT oil separator Last edited by Rydawg1; 11-23-2013 at 08:53 PM.