If you bought the blackout panel then you have some serious modifications to do. That's one of the reasons I bought the one I did. You don't have to cut it off.
The plastic part you don't have to do anything with. It's all one piece. You have to take two screws out and pop the panel off. I'd take the interior liner out too. If you were like me and knew you weren't going to use it again I was a little rough and ended up breaking off a couple of the tabs and had to fish them out of the trunk.
If you have the one were you have to cut the metal part off the back Id recommend a dremel and a hole saw. Then make sure you prep the exposed metal and paint it or you'll get rust...and quickly.
|
Threaded Mode
