Interior/Exterior Post new mods or questions about the inside or outside of your mustang |
Sponsored Ads |
|
Welcome to DFW50s.com
|
Register to remove these ads.
06-06-2013, 04:44 PM
|
#1
|
Senior Member
Join Date: May 2013
Location: Arlington, TX
Age: 39
Posts: 212
|
What size tires
I was wanting to get 20s at some point for the stang, but I was curious about tire size. What's the biggest tire I can go with front and back without throwing of the speedo? Or would you guys just suggest a tuner?
|
|
|
06-06-2013, 05:05 PM
|
#2
|
Senior Member
Join Date: Jun 2012
Posts: 5,594
|
These cars can handle up to a certain % increase or decrease in tire OD to correct the speedo, at least seeing what is said on SVTP that is. You don't really need a tune, but just a programmer that can adjust the values in the ECU via the handheld.
I personally try to stick as close to the OE tire OD as I can.
But we need to know tire widths and types of tire you are wanting to run.
Last edited by DirtyD; 06-06-2013 at 05:07 PM.
|
|
|
06-06-2013, 06:06 PM
|
#3
|
Senior Member
Join Date: May 2013
Location: Arlington, TX
Age: 39
Posts: 212
|
I was thinking Falken 452 with 255 up front and 275 or 285 out back. Te bigger the better out back just don't know how big I can go. I do plan on dropping it with some sport lines as well.
|
|
|
06-06-2013, 06:49 PM
|
#4
|
Senior Member
Join Date: Jun 2012
Posts: 5,594
|
What size tires
Originally Posted by GTRacerX
I was thinking Falken 452 with 255 up front and 275 or 285 out back. Te bigger the better out back just don't know how big I can go. I do plan on dropping it with some sport lines as well.
|
Do at least a 295 rear on a 10" rim. Or go bigger.
In the front, I would do a 9-9.5 if you can get the correct offset. Some rims are only 8.5 front. I would then run a 255-275 tires depending on rim width.
Unless you want to run a square setup
|
|
|
06-06-2013, 07:07 PM
|
#5
|
Senior Member
Join Date: Dec 2012
Location: Mesquite
Age: 33
Posts: 466
|
My tire height is 27.3in I have stock 18s with 235/50/18 all season perellis I wouldn't go wider than what you need. Depends on what your planning on doing. Like me I plan on just street drags. 40-160 rolls and I won't be going over 450 er so HP so I don't need a huge tire. I barely spin the 235s in 2ed gear at a 40 punch and I'm at 410rwhp now
|
|
|
06-06-2013, 07:10 PM
|
#6
|
Senior Member
Join Date: Jun 2012
Posts: 5,594
|
What size tires
Originally Posted by Zeek
My tire height is 27.3in I have stock 18s with 235/50/18 all season perellis I wouldn't go wider than what you need. Depends on what your planning on doing. Like me I plan on just street drags. 40-160 rolls and I won't be going over 450 er so HP so I don't need a huge tire. I barely spin the 235s in 2ed gear at a 40 punch and I'm at 410rwhp now
|
How? I spun my stock 255s with ease in second doing a 30 roll in 2nd.
|
|
|
06-06-2013, 07:12 PM
|
#7
|
Senior Member
Join Date: Jun 2012
Location: Keller
Age: 61
Posts: 1,006
|
You can never really have too much tire. I spun the 245's badly with just the lt's and tune, and they are an absolute joke on there right now. The Razors are 10" and 9" and have 275/35's and 255/35's on them but I prefer the 295's on the back and will be switching them out when the 275's wear out.
__________________
|
|
|
06-06-2013, 07:17 PM
|
#8
|
Senior Member
Join Date: Dec 2012
Location: Mesquite
Age: 33
Posts: 466
|
I Get just a tiny spin when I punch it. Idk how but these tire have 18k miles on em and are still working for me fine . When I get new rims I will only be going to 275s in a summer performance tire most likely.
|
|
|
06-06-2013, 07:24 PM
|
#9
|
Senior Member
Join Date: Jun 2012
Posts: 5,594
|
What size tires
Originally Posted by Zeek
I Get just a tiny spin when I punch it. Idk how but these tire have 18k miles on em and are still working for me fine . When I get new rims I will only be going to 275s in a summer performance tire most likely.
|
I ditched my p-zeros at 20k with around 5/32 left. And I spun them maybe 10-15 times, but only for a few seconds. No burnouts, no drag racing, nothing. Not even hard launches
|
|
|
06-06-2013, 07:28 PM
|
#10
|
Senior Member
Join Date: Dec 2012
Location: Mesquite
Age: 33
Posts: 466
|
Mine are about to make a trip to NY and back then its time for new wheels n tires soon as I can afford it. I'll proly use these for 23-25k miles
|
|
|
06-07-2013, 02:35 PM
|
#11
|
Banned
Join Date: Apr 2013
Location: Gainesville,Tx
Age: 38
Posts: 2,405
|
Originally Posted by Zeek
My tire height is 27.3in I have stock 18s with 235/50/18 all season perellis I wouldn't go wider than what you need. Depends on what your planning on doing. Like me I plan on just street drags. 40-160 rolls and I won't be going over 450 er so HP so I don't need a huge tire. I barely spin the 235s in 2ed gear at a 40 punch and I'm at 410rwhp now
|
Same for me.
|
|
|
06-07-2013, 02:54 PM
|
#12
|
Senior Member
Join Date: Aug 2012
Posts: 428
|
Tires a typically what people skimp out on which is unfortunate. Tires and dampers are the two most important components to a suspension. There is no such thing as too much tire on these cars.
|
|
|
06-07-2013, 04:57 PM
|
#13
|
Senior Member
Join Date: May 2013
Location: Arlington, TX
Age: 39
Posts: 212
|
Could you fit 315s on a 20 inch wheel with the car lowered 1 inch front 1.5 back?
|
|
|
06-07-2013, 04:58 PM
|
#14
|
Senior Member
Join Date: Jun 2012
Posts: 5,594
|
What size tires
Originally Posted by GTRacerX
Could you fit 315s on a 20 inch wheel with the car lowered 1 inch front 1.5 back?
|
Yeah. I'm pretty sure that Steve is running a 315 on his wheels.
|
|
|
06-07-2013, 05:06 PM
|
#15
|
My Stapler!
Join Date: Jun 2012
Location: Dtown
Posts: 1,928
|
Originally Posted by DirtyD
Yeah. I'm pretty sure that Steve is running a 315 on his wheels.
|
Steve is running a 305.
I had to remove my sportlines in the rear and put in prokits just to run a 315.
__________________
2012 GT/CS
93 Cobra
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|